Textile Softeners_details3 – Elvan

× Close

Textile Softeners

» POLYSOFT – OC (Non-Yellowing Cationic Softener)

	POLYSOFT-OC is a non-yellowing, cationic softener imparting soft and supple handle to fabric. It is applicable to cotton as well as cotton / synthetic blends.

	GENERAL CHARACTERISTICS :

	» APPEARANCE: Off white to pale cream paste. » IONIC NATURE: Cationic. » SOLUBILITY: Dispersible in water. » pH(1% Aq.dispersion): 4 – 6.

	APPLICATION :

	Ensure proper dilution, first with equal quantity of hot water and then dilute it to required strength for proper dispersion. Continuous application can be made with 10 to 30g/l depending on pickup to obtain 0.5 to 2.0% owf. The same ratio can be opted for resin finishing. DOSAGE: 0.5 to 2.0% owf. pH: 4.5 to 5.5 TEMPERATURE: 40 to 50°C TIME: 15 to 20 minutes. LIQUOR RATIO: 5:1 to 15:1

	PACKING: 50Kgs. net in Plastic Containers.

» POLYSOFT – NI(Spl.) (Non-ionic Softener)

	POLYSOFT-NI(Spl.) is a nonionic softener especially useful in Resin finishing to overcome loss in tensile strength and to achieve wash-n-wear finish which is top priority requirement in modern dress wear varieties.

	GENERAL CHARACTERISTICS :

	» APPEARANCE: White paste. » IONIC NATURE: Nonionic. » MISCIBILITY: Miscible to any proportion in cold water. » pH: 7 – 8. » STABILITY TO: HARD WATER: Good ACIDS: Good ALKALIES: Good SALTS: Good » COMPATIBILITY WITH: ANIONIC PRODUCTS: Good NONIONIC PRODUCTS: Good CATIONIC PRODUCTS: Good SYNTHETIC PRODUCTS: Good

	SALIENT FEATURES :

	» Especially suitable for white goods. » Imparts smooth handle and desired softness to the fabric. » Non-yellowing tendency even at high temperature involved in curing and dyeing stages. Therfore suitable for resin finishing of white goods with shock cure process. » POLYSOFT-NI(Spl.) is compatible with cationic and anionic agents. » In combined application with optical brightening agents, it gives outstanding brightness in treated fabric. » Has no effect on the shade or the light fastness of dyeing. It can be applied in the dye bath as lubricant too.

	APPLICATION :

	POLYSOFT-NI(Spl.) can be used for all types of fibres and fabrics to achieve soft and full handle. It can be applied by padding and exhaustion methods as a soft self finish or in combination with other ingredients and optical brightening agents. As a self finish By padding : POLYSOFT-NI(Spl.) 10 – 30g/l with 80% pickup, dry at 150°C to 180°C for 60 to 90 seconds. By exhaust : POLYSOFT-NI(Spl.) 23% at about 50°C for 15 to 20 minutes.

	PACKING: 50Kgs. net in Plastic container.

(Note: The above information is offered as true and accurate to the best of our knowledge but without obligation and liability.)